Home > Windows 10 > After Changing Network Adapter Shares Are Not Reachable Anymore

After Changing Network Adapter Shares Are Not Reachable Anymore


Nasrin says: 5 years ago Hi,i'm trying to make HomeGroup but at my registry this adress is incomplete HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters i don't have the Services folder ! The reason is that this is a separate function of the firewall, which is independent of the interface used and of the associated settings. What I got was 'Error Code 1068. Command "Explore" is not present in Win10 - is not recognized as an internal or external command. navigate here

Cheers and good luck to all others haveing troubles :-( Sunday, May 29, 2016 7:58 AM Reply | Quote 0 Sign in to vote My PC was running Win7 with two If I could just uninstalll all the networks and get a local printer to work, that would be a start. Signing up allows you to get personalized management of your system. For rpm, you will need to use the options --httpproxy HOST and maybe --httpport PORT For yum, you may have to do export http_proxy=HOST:PORT in /etc/yum.conf or from the command line http://www.sevenforums.com/network-sharing/123469-after-changing-network-adapter-shares-not-reachable-anymore.html

Nas Drive Not Showing On Network Windows 10

it can see the homegroup, it even names it, but the password wont go through to even try and authticate it??? If you just installed Service Pack 2 or a later service pack and have the problem since then, try also to uninstall the network adapter driver, reboot, then let Windows (PnP) The laptop could see the desktop, but not the other way around.

How do I do an email change? THis is the error I get: HOMEGROUP- Windows cannot setup a Homegroup on this computer. The way this feature is set up is somewhat counter-intuitive, as it says "Always On" in its name, whether or not the feature is turned on. Windows 10 Nas Access Optional: If you saved a backup copy of nettcpip.inf, restore it now.

In your HDA, bring up a terminal with root access (or ssh into your HDA if you do not have console). Can't Access Nas Windows 10 It brought up your site as the number 2 hit. Other PC's on the network can be seen but my Synology NAS and Humax HDR only show under media devices when they used to appear under Computers as well. http://serverfault.com/questions/104791/windows-server-2008-r2-network-adapter-stops-working-requires-hard-reboot share|improve this answer answered Sep 10 '13 at 22:53 Michael Geary 5404720 1 Worked for me.

When I removed the the Syntax 802.11b adapter from the black and installed it on the white, the white could no longer access the Internet. 0x80070035 Network Path Not Found None of it worked. If so, change the name of one of them; then create a new homegroup in one of the devices from the beginning. It does not necessarily mean that there is anything wrong.

Can't Access Nas Windows 10

Scott says: 6 years ago Is there an easy way to turn on logging so you can actually get an error message related to whatever's failing? (I have 3 computers - What do I get for signing up? Nas Drive Not Showing On Network Windows 10 Is something missing? Nas Is Not Accessible Windows 10 App Packaging 3 questions How many stages does an app go through to become Live?

Thanks to this, i figured out what the problem is. check over here This can run amok and scan until it has used up all resources. There may not be technical limitations, however there are some non-technical limitations on how ZFS may be bundled with a Linux system. In the desktop, go the bottom right corner of the window and click Settings, in the Settings windows, click Control Panel. Nas Is Not Accessible. You Might Not Have Permission

For info about network troubleshooting, see Windows help." Any ideas? I'm trying to connect through my 2WIRE router from AT&T, is that the problem? It can be caused by the following sequence in the configuration file: dev-type tun dev abcdefg and a workaround is to change to the single line dev tun (or substitute "tap" his comment is here Also, grab a copy of the routing table from the Windows machine (route print) during a failure, too. (I'm trying to ascertain if the NIC / driver is going bonkers on

If I cannot use the app, can it be refunded? Nas Not Showing On Network Windows 7 i have windows7 home premium. If your PCs are identically named, your homegroup will not recognize one or the other computer, or you may have other issues.

We'll see if that helps.

The strange is that my Windows 7 laptop is ok but both Windows have the 0x80070035 error. Unfortunately, we cannot support this request yet, for technical reasons. I'm sure it was a combination of doing everything on this post and then rebooting everything in the world. Windows 10 Nas Server Once you know the IP of the WAN port _in the router_, not the modem, set that to DMZ in the modem.

If you have a lot of memory, you can limit your amount of swap, unless you really plan to run memory-intensive tasks. When you change the IP address from automatic to a fixed IP address while the adapter is not connected, you always get a address at first when the adapter reconnects. The Windows Network and workgroups folders are also missing. weblink The Internet Connection Sharing and Internet Connection Firewall (ICF) services do not start because of a dependency failure.

This chapter here only contains general advice that is not specific to your problem. I left the homegroup on both computers, and neither one is detecting it, but neither one can create a new one - I get the message "Windows cannot set up a My PC (home network) can recognize my laptop and its folders but cannot open them. Drives cannot be mapped though when in Microsoft log-in mode.

foo.tun and foo.tap: These are kexts for obsolete Cisco and Tunnelblick VPN clients (and some others), loaded when an older version of Tunnelblick is launched (and unloaded when the computer restarts). etc. If then everything works, you know that the problem is only in the communication between the problem computer and the DHCP server, and it should be repaired. hld.c64.org/poldi/lunix/lunix.html –Evan Anderson Jan 20 '10 at 22:56 2 Never trust auto settings on a production environment.

Requires Windows XP with Service Pack 2 or higher and Internet Explorer 6 or higher with scripting enabled. Something as simple to use as a PDA, for the home and home networking. If, however, an unknown program causes an unblocking question, you should try to find out what program this is, what it does, and whether this is desired. If you have a complex virtual networking setup, it may be a good idea to take a screenshot or make some notes before upgrading to Windows 8.1.

I'm using Windows10 Ent x64 and I can't even see the SynologyNAS in my network, but I can access is via any web browser. What does it stand for? These program can block the connections and prevent you from connecting to a HomeGroup. NOTE 1: This was only in the "Desktop" Skype which I had added to this Windows 8.1 system.

You can check if your computers are on the same network by going to the command prompt and typing in IPCONFIG. While this is not a universal fix, it's worth trying if you are using a PIN to logon.